The
United Model 2010 AWWA
Resilient Seated Gate Valve offers State of the Art design
and construction. Manufactured to exceed the requirements of
AWWA C515 Standard, the body, bonnet, and wedge are of high
strength ductile-iron. The wedge is totally encapsulated
with EPDM rubber to provide a leak proof seal every time.
The stem and specially designed bonnet studs are of
Stainless Steel; there are no exposed nuts or fasteners. The
Model 2010 is Fusion Bonded Epoxy Coated to AWWA C550
Standard, offering the ultimate in corrosion protection.
The
United Model 2010 is UL Listed at 300 psi, the
highest rated pressure in the industry (2.5”-12” Sizes) and
is FM Approved at 250 psi (4”-12” Sizes). It is NSF-61
Certified for use in Drinking Water Systems.
The
United Model 2010 is available in Mechanical
Joint, Flanged, Mechanical Joint x Flanged, Push-On, and
Tapping Valve end configurations.
The
United Model 2010 is available in Mechanical
Joint, Flanged, Mechanical Joint x Flanged, and Tapping
Valve configurations. 14” through 24” Sizes are UL Listed
and are available with Spur or Bevel Gear Operators.
The
United Model 7700 Swing
Check Valve is manufactured in strict accordance with AWWA
C508 Standard. The heavy duty body is of ASTM A126, Class B
cast iron, Fusion Bonded Epoxy Coated with DuPont Napgard®
powder, Certified to NSF-61. Bonnet bolts are of Type 304
Stainless Steel (standard), offering the ultimate in
corrosion protection. Internal gaskets and seat rings are of
NBR Rubber. The Clevis Pins and Hanger Shafts are of Type
304 Stainless Steel to provide long lasting service for
water, sewer, or wastewater applications.
United
Model 7700 Swing Check Valves are available with flanged
ends, in standard configuration. Also available with Lever &
Weight or Lever & Spring.
The United
Model 8700, AWWA C508 swing check valve is manufactured of ductile iron,
it is UL listed and FM approved to 300psi with a clear waterway. Fusion
bonded epoxy coating is inside and out to AWWA C550. The
United Model 8700 is available with
flange and groove end configurations.
Manufactured in strict
accordance with AWWA C502 Standard, the
United Model F-06
“Fire-Flo” Hydrant is fully compatible with the industry
leading fire hydrant; all parts, kits, and tools are
interchangeable, allowing the end user to standardize on
inventories and operator training. The F-06 has many years
of field proven service.
The F-06 is UL Listed / FM
Approved and is rated at 250 psi water working pressure. All
bury depths are in stock for immediate shipment, in either
open left or open right configuration. Tools, kits, and
parts are also shipped from stock.
The
United Model 2010 AWWA
Resilient Seated Gate Valve offers State of the Art design
and construction. Manufactured to exceed the requirements of
AWWA C515 Standard, the body, bonnet, and wedge are of high
strength ductile-iron. The wedge is totally encapsulated
with EPDM rubber to provide a leak proof seal every time.
The stem and specially designed bonnet studs are of
Stainless Steel; there are no exposed nuts or fasteners. The
Model 2010 is Fusion Bonded Epoxy Coated to AWWA C550
Standard, offering the ultimate in corrosion protection.
The
United Model 7700 Swing
Check Valve is manufactured in strict accordance with AWWA
C508 Standard. The heavy duty body is of ASTM A126, Class B
cast iron, Fusion Bonded Epoxy Coated with DuPont Napgard®
powder, Certified to NSF-61. Bonnet bolts are of Type 304
Stainless Steel (standard), offering the ultimate in
corrosion protection. Internal gaskets and seat rings are of
NBR Rubber. The Clevis Pins and Hanger Shafts are of Type
304 Stainless Steel to provide long lasting service for
water, sewer, or wastewater applications.
