Industrial Auxiliary Equipment

FMW Distributors is an pleased to offer Temptek industrial auxiliary equipment. Temptek has revolutionized the market of low cost auxiliary equipment for industry. Temptek's product philosophy is to provide economically affordable equipment that is built for round the clock operations and provides years of trouble-free service while offering maximum returns on capital investments.

FMW Distributors only sells to other businesses, government agencies and general contractors. Unfortunately, we do not sell to the general public and cannot drop ship orders to residential addresses, except for orders placed by general contractors. If shipment is made to a general contractor's residential address, a resale certificate must be faxed prior to placing an order.

Temperature Control Units

Water & Oil Units

Temperature control units circulate a fluid medium (typically water or oil) through a process application for HEATING can supply temperatures between 30° to 400°F (depending on medium). Temperature controller units service only a single process at a time, but are designed to be moved between process applications as the need requires.

WATER UNITS 30°F - 250°F		OIL UNITS 100°F - 400°F
10 KW & 35 to 80 GPM 16 KW & 35 to 80 GPM		12 KW & 30 to 60 GPM 16 KW & 30 to 60 GPM 24 KW & 30 to 60 GPM

A pump circulates water through the process. An electric heater and a cooling valve work together to control the water temperature. Theses units are portable and require a plant water supply source and are available with a variety of different control instruments, heater sizes, and cooling valves.		A pump circulates high temperature oil through the process. An electric heater elevates the temperature of the oil. Cooling is achieved through ambient radiation or through the use of an optional heat exchanger. Units are available microprocessor control instrument, several heater KW ratings, and several optional cooling heat exchanger sizes.

Liquid Portable Chillers

Air & Water-Cooled Models : ¼ to 40 Tons

Process liquid chillers are designed to circulate a fluid medium (typically water, or a water-glycol solution) through a process application for COOLING and can supply temperatures between 20° to 65°F. These units can service a single or multiple cooling points, and are designed to be moved between process applications as the need requires. Generally, portable liquid chillers are offered in capacities from ¼ to 40 tons.

AIR-COOLED LIQUID CHILLERS ¼ - 30 tons		WATER-COOLED LIQUID CHILLERS 1 - 40 tons

Air-cooled liquid chillers use ambient air to dissipate process heat. These units efficiently run in plant air temperatures between 60° to 95°F. Major benefits to air-cooled units are heat recovery (for supplemental heating), exhaust air ducting (for plant ventilation), and less operating expense.		Water-cooled liquid chillers use a plant water supply source (tower water, city water, or well water) to dissipate process heat. Major benefits to water-cooled units are less capital expense and less maintenance.

Process Chillers: Central Units

Air & Water-Cooled Models : 5 to 180 Tons

Process liquid chillers are designed to circulate a fluid medium (typically water, or a water-glycol solution) through a process application for COOLING and can supply temperatures between 20° to 65°F. Central units provide enough capacity to serve multiple process applications. Generally, central liquid chillers are offered in capacities from 5 to 180 tons and can serve several process at once.

AIR-COOLED LIQUID CHILLERS 5 - 40 tons		WATER-COOLED LIQUID CHILLERS 1 - 180 tons

Air-cooled liquid chillers use ambient air to dissipate process heat. These units efficiently run in plant air temperatures between 60° to 95°F. Major benefits to air-cooled units are heat recovery (for supplemental heating), exhaust air ducting (for plant ventilation), and less operating expense.		Water-cooled liquid chillers use a plant water supply source (tower water, city water, or well water) to dissipate process heat. Major benefits to water-cooled units are less capital expense and less maintenance.

Desiccant Dryers

NDB Series : Specifications : Features : Options

Self-Contained Dryer/Hopper Design

Throughput 25 - 40 lb/hr

2 Models to Choose From: NDB-25-T and NDB-50-T

Temptek desiccant dryers use the industry standard dual-bed drying concept in a compact single blower configuration.

One blower and multi-function valve control both the process and regeneration flow. The heaters are contained within the desiccant beds to minimize space.

Machine Mount packages provide a quick disconnect glass tube base with integrated vacuum flapper. A proportioning valve option may be easily added to any model.

Vacuum Loader : VL Series

Guaranteed -40°F dewpoint process air.
Dual bed, stainless steel construction.
Integrated stainless steel insulated drying hoppers with large access door and sight glass (200 lb. hopper is carbon steel).
Compact design with single blower and a multi-function valve to control both the process and regeneration heaters contained within the desiccant beds to save space.
Standard voltage 460/1/60 for NDB-25-T and 460/3/60 for NDB-50-T.
Cyclonic 2 stage process filter.
High heat up to 350°F (cooling coil required over 225°F.
Tubular Incoloy® sheath heaters.
Nema 1 enclosure.
Main line contactor.
High efficiency 13x molecular sieve desiccant.
Slide gate shut off.
Analog thermometer at hopper inlet.
2 year warranty.
Micro PLC Based Control
- Over-temperature alarm and shutdown with indication.
- Auto-tune PID temperature control with dual LED display.
- Full function graphic display.

Vacuum Loaders

VL Series : Specifications : Features : Options

5 to 19 lb.

Remote Mount Mini PLC Control

Modular Design

3 Models to Choose From: VL-5-T, VL-12-T and VL-19-T

Temptek VL Series Vacuum Loaders provide self-contained, vacuum transfer of plastics pellets and regrinds over short distances using powerful single-phase vacuum motors.

Standard models are made for flange mounting to existing bins or hoppers.

Machine Mount packages provide a quick disconnect glass tube base with integrated vacuum flapper. A proportioning valve option may be easily added to any model.

Vacuum Loader : VL Series

Reinforced filter disc has polyester layer to trap fines and rigid metal backing to extend filter life.
Compressed-air blowback reduces filter clogging for less maintenance.
Includes 15 ft. (4.6 m) length of flex hose, pickup wand and hose clamps.
All material contact points are not-ferrous.
Dump Valve with integrated demand level switch on standard models.
One Year warranty (Excludes normal maintenance items).
Micro PLC Based Control
- Complete programming and monitoring capabilities.
- Graphic faceplate displays parameter value codes and provides step-by-step programming instructions.
- Can be remotely located at operator level.

Pump Tank Stations

Polyethylene and Steel Reservoirs, from 200 - 3600 Gallons

Temptek pump tank stations are a two part system, a reservoir and pumping station with one or two pumps. The assembly is designed circulate a fluid medium (typically water or water-glycol solution) through several process applications through out your plant. Pump tank stations work with COOLING TOWER SYSTEMS or CHILLING SYSTEMS to make a central water system.

POLYETHYLENE RESERVOIRS 450 - 3200 Gallons		STEEL RESERVOIRS 250 - 3600 Gallons

These units use a patented design to create a structurally sound cylindrical reservoir that offers total corrosion resistance. Polyethylene reservoirs can be used for tower or chiller systems.		These units use steel sheets, double pass welded into a rectangular shaped reservoir, reinforced by angular tank banding.

Cooling Tower Systems

Fiberglass and Galvanized Steel Models, from 8 - 540 Tons

Temptek tower cells are designed to COOL water through evaporation. Cooling towers are part of a central system (with a pump tank station). Tower cells supply temperatures to 85° (depending on ambient air heat and humidity) and are installed outside the plant building, either elevated on a stand or mounted on the roof.

FIBERGLASS MODELS 45 - 540 tons		GALVANIZED STEEL MODELS 8 - 126 tons

These tower cells are made of durable UV protected fiberglass with a counter air flow design.		These cells are made of galvanized sheet metal with a cross air flow design.

Requests For Quotes

RFQs may be faxed to 936-448-4699.

Quotes will be responded to within 24 hours.

If you have an emergency RFQ, please phone 936-582-4616.

RETURN TO TOP